Interior Process

1.Set up

•           Rooms and areas to be painted are scheduled with the customer.

•           Large furniture is moved into the center of the room.

•           Furniture is covered with plastic.

•           Floors are covered with drop cloths.

•           Extra care is take for hardwood floors.

 

2. Preparation

•           Walls are scuff-sanded

•           Holes and cracks are filled

•           Gaps in trim are caulked

•           Washing is done when required

 

3. Painting:

•           Repaired areas are primed.

•           Two finish coats are applied to all surfaces.

4. Clean Up:

•           Furniture is moved back to original positions.

•           Floors and carpets are thoroughly vacuumed and swept.

•           all garbage is removed.

•           Touch-up paint is laveled and left with the customer

 

 

Exterior Process:

1. Cleaning

•           Pressure washing is performed before every job

•           Delicate areas are hand -washed

•           Loose paint chips and debris are cleaned up

•           Areas cleaned are given time to dry 

 

 

2. Pre Paint Preparation

 

•           All loose paint is removed, all bare areas are primed.

•           All surfaces that will not be painted are covered to protect against splatter and drips.

•           Outdoor furniture is removed and covered if necessary

•           Glossy areas are scuff-sanded to allow for proper adhesion.

•           If necessary, areas around doors and windows are caulked

•           Feather-sanding and stripping are done as needed.

 

3. Painting

 

•           Two finish coats are applied for proper coverage

•           Paint is applied with a brush, roller, or sprayer as warranted

 

4 Clean-Up

 

•           Performed daily and upon completion of the job

•           All garbage is removed

•           Left over paint is labeled and left with customer

•           Outdoor fixtures and furniture are upt back to their original positions     

 

5. Inspection

•           The Fiore team conducts a site inspection to ensure job satisfaction.

•           The customer walks around with the foreman or manager

•           Final touch-ups are noted and completed before the team leaves

•           The customer is given the Customer Comment Card for feedback and warranty. Payment is received.